skip to content

Wilo Actun FIRST SPU4-02-10-B 4” Borehole Pump End – for 0.55 kW motor

R 1,045.09 incl. VATAdd to Basket
Wilo Actun FIRST SPU4-02-10-B 4” Borehole Pump End – for 0.55 kW motor image 1

The Wilo Actun FIRST SPU4-02-10-B is a 4” multistage submersible borehole pump end from the Wilo Actun FIRST range, built for a 0.55 kW 4” motor (motor and control box sold separately, or buy the complete set). Nominal flow 2 m³/h, 10 stages, maximum head about 68 m – made for household and small-holding supply from medium-depth boreholes.

Overstock special: 18 available at a reduced price while stock lasts.

At a glance

Power: 0.55 kWMax. head: 67 mMax. flow: 3 m³/hConnections: Rp 1¼Best for: Water supply from boreholes and rainwater storage tanks, Domestic water supply, sprinkling and irrigation, Pressure boosting

Specifications

BrandWilo
Item code6083518A
ModelActun FIRST SPU4-02-10-B
Type4” submersible borehole pump end (hydraulic part, no motor)
Nominal flow2 m³/h
Number of stages10
Maximum head68 m
Required motor0.55 kW 4” NEMA submersible motor (230 V single-phase or 400 V three-phase)
Discharge connectionRp 1¼
Pump outside diameter98 mm
ImpellersNoryl (PPE), floating
Housing, shaft, strainer, check valveStainless steel 1.4301 / 304
Max. sand content50 g/m³
Max. fluid temperature30 °C
Max. immersion depth200 m
Protection classIP68
Max. starts per hour20
Complete-unit article6083324 Wilo, 1~230 V
Motor power0.55 kW

Performance Table

Flow Q m³/h00.91.21.51.82.12.42.73.0
Head H m676461585449433628

Head at each flow rate from the manufacturer's technical data. For a duty-point check use the Get a Quote wizard below.

Applications

  • Water supply from boreholes and rainwater storage tanks
  • Domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • Pumping clean water without long-fibre or abrasive constituents

Features

  • Multistage 4” submersible pump end (hydraulics only) with NEMA coupling for a standard 4” motor
  • All parts in contact with water in stainless steel 1.4301 and Noryl (PPE) – corrosion-free
  • Integrated non-return valve in the discharge head
  • Floating Noryl impellers for low wear with sand content up to 50 g/m³
  • Suitable for vertical or horizontal installation (cooling jacket for horizontal)
  • Protection class IP68, max. immersion depth 200 m, fluid 3–30 °C

Dimensions & Weight

ParameterValue
Pump end length321 mm
Diameter98 mm
Pump end mass3.3 kg
Complete unit length (with 230 V motor)702 mm
Complete unit mass (with 230 V motor)12.6 kg
Shipping mass (approx.)3.9 kg

Hydraulic data from the Wilo SPU4 selection charts and data sheets. Pump end supplied without motor. Specifications may change without notice.

Need help choosing or want a price?

Our pump team will check the right size for your flow and head and give you a quote.

WhatsApp us: 082 516 2248 Get a Quote / Size my pump info@pumps.co.za

Frequently Asked Questions

What is the maximum head of the Wilo Actun FIRST SPU4-02-10-B 4” Borehole Pump End – for 0.55 kW motor?

The Wilo Actun FIRST SPU4-02-10-B 4” Borehole Pump End – for 0.55 kW motor has a maximum head of 67 m.

How much water can the Wilo Actun FIRST SPU4-02-10-B 4” Borehole Pump End – for 0.55 kW motor pump?

The Wilo Actun FIRST SPU4-02-10-B 4” Borehole Pump End – for 0.55 kW motor pumps up to 3 m³/h.

What is the motor power of the Wilo Actun FIRST SPU4-02-10-B 4” Borehole Pump End – for 0.55 kW motor?

The motor power is 0.55 kW.

What are the pipe connections of the Wilo Actun FIRST SPU4-02-10-B 4” Borehole Pump End – for 0.55 kW motor?

Rp 1¼.

This product can be found under