Wilo Actun FIRST SPU4-03-05-B 4” Borehole Pump End – for 0.37 kW motor
19382
The Wilo Actun FIRST SPU4-03-05-B is a 4” multistage submersible borehole pump end from the Wilo Actun FIRST range, built for a 0.37 kW 4” motor (motor and control box sold separately, or buy the complete set). Nominal flow 3 m³/h, 5 stages, maximum head about 33 m – made for household supply, garden and small irrigation.
Overstock special: 3 available at a reduced price while stock lasts.
At a glance
Power: 0.37 kWMax. head: 34 mMax. flow: 4.2 m³/hConnections: Rp 1¼Best for: Water supply from boreholes and rainwater storage tanks, Domestic water supply, sprinkling and irrigation, Pressure boostingSpecifications
| Brand | Wilo |
| Item code | 6083521A |
| Model | Actun FIRST SPU4-03-05-B |
| Type | 4” submersible borehole pump end (hydraulic part, no motor) |
| Nominal flow | 3 m³/h |
| Number of stages | 5 |
| Maximum head | 33 m |
| Required motor | 0.37 kW 4” NEMA submersible motor (230 V single-phase or 400 V three-phase) |
| Discharge connection | Rp 1¼ |
| Pump outside diameter | 98 mm |
| Impellers | Noryl (PPE), floating |
| Housing, shaft, strainer, check valve | Stainless steel 1.4301 / 304 |
| Max. sand content | 50 g/m³ |
| Max. fluid temperature | 30 °C |
| Max. immersion depth | 200 m |
| Protection class | IP68 |
| Max. starts per hour | 20 |
| Complete-unit article | 6083327 Wilo, 1~230 V |
| Motor power | 0.37 kW |
Performance Table
| Flow Q m³/h | 0 | 1.2 | 1.8 | 2.4 | 3.0 | 3.6 | 4.2 |
|---|---|---|---|---|---|---|---|
| Head H m | 34 | 32 | 30 | 27 | 23 | 18 | 11 |
Head at each flow rate from the manufacturer's technical data. For a duty-point check use the Get a Quote wizard below.
Applications
- Water supply from boreholes and rainwater storage tanks
- Domestic water supply, sprinkling and irrigation
- Pressure boosting
- Lowering the water level
- Pumping clean water without long-fibre or abrasive constituents
Features
- Multistage 4” submersible pump end (hydraulics only) with NEMA coupling for a standard 4” motor
- All parts in contact with water in stainless steel 1.4301 and Noryl (PPE) – corrosion-free
- Integrated non-return valve in the discharge head
- Floating Noryl impellers for low wear with sand content up to 50 g/m³
- Suitable for vertical or horizontal installation (cooling jacket for horizontal)
- Protection class IP68, max. immersion depth 200 m, fluid 3–30 °C
Dimensions & Weight
| Parameter | Value |
|---|---|
| Pump end length | 231 mm |
| Diameter | 98 mm |
| Pump end mass | 2.5 kg |
| Complete unit length (with 230 V motor) | 592 mm |
| Complete unit mass (with 230 V motor) | 11.2 kg |
| Shipping mass (approx.) | 3.1 kg |
Hydraulic data from the Wilo SPU4 selection charts and data sheets. Pump end supplied without motor. Specifications may change without notice.
Need help choosing or want a price?
Our pump team will check the right size for your flow and head and give you a quote.
WhatsApp us: 082 516 2248 Get a Quote / Size my pump info@pumps.co.za
Frequently Asked Questions
What is the maximum head of the Wilo Actun FIRST SPU4-03-05-B 4” Borehole Pump End – for 0.37 kW motor?
The Wilo Actun FIRST SPU4-03-05-B 4” Borehole Pump End – for 0.37 kW motor has a maximum head of 34 m.
How much water can the Wilo Actun FIRST SPU4-03-05-B 4” Borehole Pump End – for 0.37 kW motor pump?
The Wilo Actun FIRST SPU4-03-05-B 4” Borehole Pump End – for 0.37 kW motor pumps up to 4.2 m³/h.
What is the motor power of the Wilo Actun FIRST SPU4-03-05-B 4” Borehole Pump End – for 0.37 kW motor?
The motor power is 0.37 kW.
What are the pipe connections of the Wilo Actun FIRST SPU4-03-05-B 4” Borehole Pump End – for 0.37 kW motor?
Rp 1¼.




