Wilo Actun FIRST SPU4-01-13 Complete 4” Borehole Pump Set – 0.37 kW 230 V with motor and control box
19395
The Wilo Actun FIRST SPU4-01-13-B complete set is a ready-to-install 4” borehole pump: the Actun FIRST SPU4-01-13-B pump end, a 0.37 kW 230 V Wilo X4-OR-0.37-1-230-50-B2 oil-filled submersible motor and the matching CB-0.37-230-50-RC16-PG control box with capacitor and overload protection. Nominal flow 1 m³/h, maximum head about 86 m – made for deep boreholes with a low yield – household supply from 60–250 m. Add cable and a safety rope and you have everything for the installation.
Overstock special: limited sets available at a reduced price while stock lasts.
At a glance
Power: 0.37 kWSupply: 230 VMax. head: 86 mMax. flow: 1.5 m³/hConnections: Rp 1¼Best for: Water supply from boreholes and rainwater storage tanks, Domestic water supply, sprinkling and irrigation, Pressure boostingSpecifications
| Brand | Wilo |
| Item code | SET-6083512A |
| Pump end | Actun FIRST SPU4-01-13-B |
| Motor | X4-OR-0.37-1-230-50-B2 – 0.37 kW, 1~230 V, 50 Hz |
| Control box | CB-0.37-230-50-RC16-PG |
| Nominal flow | 1 m³/h |
| Number of stages | 13 |
| Maximum head | 86 m |
| Rated current | 3.3 A |
| Discharge connection | Rp 1¼ |
| Outside diameter | 98 mm (fits 4” boreholes and larger) |
| Max. sand content | 50 g/m³ |
| Max. immersion depth | 200 m |
| Protection class | IP68 |
| Motor power | 0.37 kW |
| Voltage | 230 V |
Performance Table
| Flow Q m³/h | 0 | 0.3 | 0.6 | 0.9 | 1.2 | 1.5 |
|---|---|---|---|---|---|---|
| Head H m | 86 | 78 | 70 | 56 | 42 | 23 |
Head at each flow rate from the manufacturer's technical data. For a duty-point check use the Get a Quote wizard below.
Applications
- Water supply from boreholes and rainwater storage tanks
- Domestic water supply, sprinkling and irrigation
- Pressure boosting
- Lowering the water level
- Pumping clean water without long-fibre or abrasive constituents
Features
- All parts in contact with water in stainless steel 1.4301 and Noryl (PPE) – corrosion-free
- Integrated non-return valve in the discharge head
- Floating Noryl impellers for low wear with sand content up to 50 g/m³
- Suitable for vertical or horizontal installation (cooling jacket for horizontal)
- Protection class IP68, max. immersion depth 200 m, fluid 3–30 °C
What is in the set
- Wilo Actun FIRST SPU4-01-13-B 4” pump end (13 stages, stainless steel and Noryl)
- Wilo X4-OR-0.37-1-230-50-B2 4” oil-filled rewindable submersible motor, 0.37 kW, 1~230 V 50 Hz, rated current 3.3 A, 2 m lead
- Wilo CB-0.37-230-50-RC16-PG control box – start/run capacitors, overload protection, on/off switch
Dimensions & Weight
| Parameter | Value |
|---|---|
| Shipping mass (approx.) | 13.3 kg |
Hydraulic data from the Wilo SPU4 selection charts. Set assembled from Wilo stock items. Specifications may change without notice.
Need help choosing or want a price?
Our pump team will check the right size for your flow and head and give you a quote.
WhatsApp us: 082 516 2248 Get a Quote / Size my pump info@pumps.co.za
Frequently Asked Questions
What is the maximum head of the Wilo Actun FIRST SPU4-01-13 Complete 4” Borehole Pump Set?
The Wilo Actun FIRST SPU4-01-13 Complete 4” Borehole Pump Set has a maximum head of 86 m.
How much water can the Wilo Actun FIRST SPU4-01-13 Complete 4” Borehole Pump Set pump?
The Wilo Actun FIRST SPU4-01-13 Complete 4” Borehole Pump Set pumps up to 1.5 m³/h.
What power supply does the Wilo Actun FIRST SPU4-01-13 Complete 4” Borehole Pump Set need?
Supply: 230 V. Motor power: 0.37 kW.
What are the pipe connections of the Wilo Actun FIRST SPU4-01-13 Complete 4” Borehole Pump Set?
Rp 1¼.




