- Products
- Franklin Electric
- FPS & SVM Submersible Borehole Pumps
- FPS 304 Stainless Steel Turbine Series
- FPS SS690 - 149mm Series (Pump End Only)
FPS SS690 – Stainless Steel Submersible Borehole Pump Ends
The FPS SS690 is a multistage 304 stainless steel submersible borehole pump end (149 mm diameter) for high-yield boreholes, irrigation and dewatering. It is designed for 75 – 120 m³/h (1250 – 2000 l/min) and gives heads from 15 m up to 186 m with motors from 4 kW to 45 kW. Each model is supplied for a 100 mm (4") or a 150 mm (6") motor. This is the pump end only – add a submersible motor of the same kW and a starter or control panel.
| Flow | 75 – 120 m³/h (1250 – 2000 l/min) |
| Head | 15 m up to 186 m |
| Motor size | 4 – 45 kW, 2-pole, 2 900 rpm, 50 Hz |
| Motor fit | 100 mm (4") motors of 4 kW and 150 mm (6") motors from 7.5 to 45 kW |
| Motor voltage | 400 V three-phase (6" motors also in 525 V) |
| Pump diameter | 149 mm – check that the borehole is wide enough for the pump, motor and cable |
| Outlet | 4" BSP |
| Construction | 304 stainless steel shell, impellers and diffusers, cast motor bracket, built-in non-return valve |
| Water quality | sand up to 50 g/m³, particles up to 2 mm |
How to choose: use the flow your borehole can safely deliver, then pick the SS690 model whose head at that flow covers your total head – pumping water level plus the height to the tank plus pipe friction. The number after the slash is the number of stages. Choose the 4" or 6" motor version to match the motor you have or need. Each product page has the full performance table.
| Complete Specifications, Sizing and Price Guide – Click Here |
| FPS SS690 Series Performance Curves PDF, 33 kB | Download |
| FPS SS690 Series Technical Data PDF, 797 kB | Download |