SVM SS and FS Submersible Borehole Pumps

Which pump family fits your borehole?

SVM 100mm (4”) submersible pumps

SVM pumps combine stainless steel bowls with polycarbonate impellers and Noryl diffusers, so the internal parts cannot seize together. A built-in check valve protects against water hammer and the impeller design includes up-thrust protection. SVM 30 – 100 have a 1¼” (32 mm) outlet; SVM 150 – 400 have a 2” (50 mm) outlet. Maximum solids 25 g/m³, particle size 2 mm.

SVM 30 Series (Pump End Only)

SVM 55 Series (Pump End Only)

SVM 70 Series (Pump End Only)

SVM 100 Series (Pump End Only)

SVM 150 Series (Pump End Only)

SVM 200 Series (Pump End Only)

SVM 240 Series (Pump End Only)

SVM 285 Series (Pump End Only)

SVM 400 Series (Pump End Only)

SS-Series stainless steel submersible pumps

SS-Series pumps use stainless steel impellers and diffusers for corrosion resistance, an energy-efficient hydraulic design and a built-in check valve. They can run horizontally, and are listed with the motor diameter (4”, 6” or 8”) they are built for. Larger SS872 – SS10215 models are priced on request.

FPS SS609 - 133mm Series (Pump End Only)

FPS SS612 - 133mm Series (Pump End Only)

FPS SS615 - 133mm Series (Pump End Only)

FPS SS624 - 133mm Series (Pump End Only)

FPS SS630 - 133mm Series (Pump End Only)

FPS SS636 - 145mm Series (Pump End Only)

FPS SS642 - 145mm Series (Pump End Only)

FPS SS660 - 149mm Series (Pump End Only)

FPS SS675 - 149mm Series (Pump End Only)

FPS SS690 - 149mm Series (Pump End Only)

FPS SS872 - 174mm Series (Pump End Only)

FPS SS896 - 182mm Series (Pump End Only)

FPS SS10108 - 208mm Series (Pump End Only)

FPS SS10120 - 208mm Series (Pump End Only)

FPS SS10160 - 208mm Series (Pump End Only)

FPS SS10215 - 232mm Series (Pump End Only)

FS-Series 316 stainless steel submersible pumps

FS-Series pumps are made entirely in AISI 316 stainless steel with investment-cast bowls, keyed impellers, rubber bearings, a 329 duplex shaft and an integrated non-return valve on every model. Maximum running time at zero delivery is 2 minutes. All FS models are priced on request because they are configured to the duty.

FPS 100FS Series - (Pump End Only)

FPS 130FS Series - (Pump End Only)

FPS 180FS Series - (Pump End Only)

FPS 200FS Series - (Pump End Only)

FPS 260FS Series - (Pump End Only)

FPS 300FS Series - (Pump End Only)

FPS 400FS Series - (Pump End Only)

FPS 600FS Series - (Pump End Only)

FPS 1000FS Series - (Pump End Only)

How to select a borehole pump

1. Get the borehole test: safe yield (m³/h), static and pumping water level, and borehole diameter.
2. Total head = pumping water level + height to the tank or outlet + pressure required (10 m per bar) + pipe friction.
3. Choose the family by borehole size and water quality (SVM for 4”, SS for 6”/8”, FS for large or aggressive water).
4. Pick the model whose curve delivers your flow at your total head near best efficiency, then match the motor kW and diameter.
5. Add the control box/panel, cable, rising main and borehole accessories.

Worked example: a 4” borehole yielding 3 m³/h (50 l/min) with a pumping level at 60 m, a 5 m tank stand and about 5 m of friction needs about 70 m at 50 l/min – the range of the SVM 55 and SVM 70 series. Send us the borehole test for an exact curve check.

Frequently asked questions

Related ranges

• Submersible motors
• Control boxes, panels and spares
• Borehole accessories and Boreline hose
• AquaDuty 100mm borehole kits
• Borehole pumps – complete guide