DAB Jetcom 102 Auto / 0.75KW 230V Self-Priming Centrifugal Jet Pump With Automatic Pump Controller
15899
The DAB Jetcom 102 Auto is a self-priming centrifugal jet pump built for domestic water supply. It draws water from a well, tank, river or dam up to 8 metres below the pump and primes reliably even when air is present in the suction line. It is rated at 0.75 kW (1 HP) on 1 x 220-240 V ~ 50 Hz, delivering a maximum flow of 3.6 m³/h and a maximum head of 53.8 m.
This version is supplied fitted with an automatic pump controller (press control), which starts the pump the moment a tap is opened and stops it when flow ceases. It replaces a pressure vessel and pressure switch, and protects the pump by shutting it down if the water supply runs dry.
Applications
- Domestic water supply and household pressure boosting
- Drawing from wells, tanks, rivers and dams up to 8 m suction depth
- Small farms, smallholdings and gardening
- Garden irrigation and sprinkler systems
- Small-scale industrial services where self-priming is necessary
Pump Construction
- Self-priming design with excellent suction capacity, even with air bubbles present
- Handles water with low levels of sandy impurities
- Pump body in technopolymer with die-cast aluminium motor support
- Impeller, diffuser, venturi tube and sand guard in technopolymer
- Stainless steel wear ring
- Carbon / ceramic mechanical seal
Motor Construction
- Asynchronous, closed, with external air cooling
- Rotor on oversized greased-for-life ball bearings for low noise and long life
- Built-in thermo-amperometric overload protection
- Permanently inserted capacitor (single phase)
- Manufactured to CEI 2-3 and CEI 61-69 (EN 60335-2-41)
Automatic Pump Controller
- Starts the pump automatically when a tap or outlet is opened
- Stops the pump automatically once flow ceases
- Dry-run protection shuts the pump down if the water supply fails
- Built-in non-return valve prevents backflow
- Removes the need for a pressure vessel and separate pressure switch
- LED indication of power, pump running and fault status
- Manual restart after a dry-run trip
Materials in Contact with the Liquid
| Component | Material |
|---|---|
| Pump body | Technopolymer A |
| Impeller | Technopolymer A |
| Venturi / diffuser / nozzle group | Technopolymer A |
| Shaft with rotor | AISI 416 stainless steel (X12 CrS13) |
| Mechanical seal | Carbon / ceramic |
| Seal holder cover | AISI 304 stainless steel (X5 CrNi 1810) |
| O-ring gasket | NBR rubber |
Specifications
| Parameter | Value |
|---|---|
| Model | DAB Jetcom 102 M + Automatic Pump Controller |
| Pump type | Self-Priming Centrifugal Jet Pump |
| Power supply | 1 x 220-240 V ~ 50 Hz |
| Absorbed power P1 max | 1.13 kW |
| Nominal power P2 | 0.75 kW (1 HP) |
| Rated current | 5.1 A |
| Capacitor | 16 µF / 450 V |
| Maximum head | 53.8 m |
| Maximum flow | 3.6 m³/h |
| Suction port (DNA) | 1" GAS |
| Discharge port (DNM) | 1" GAS |
| Liquid temperature range | 0 °C to +35 °C (domestic use, EN 60335-2-41) |
| Maximum ambient temperature | +40 °C |
| Maximum operating pressure | 6 bar (600 kPa) |
| Maximum suction depth | 8 metres |
| Motor protection rating | IP 44 |
| Terminal block protection rating | IP 55 |
| Insulation class | F |
| Installation | Fixed, horizontal position |
| Pump gross weight | 9.5 kg |
Performance
| Flow Q (m³/h) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3.0 | 3.6 |
|---|---|---|---|---|---|---|---|
| Head H (m) | 53.8 | 47 | 41 | 36.3 | 32.4 | 28.8 | 25.8 |
Performance curves are based on kinematic viscosity of 1 mm²/s and density of 1000 kg/m³. Curve tolerance to ISO 9906.