DAB K 35/100 M / 1.1KW 230V Twin-Impeller Centrifugal Pump
15900
The DAB K 35/100 M is a twin-impeller centrifugal pump built for pressurisation and general water supply. Two impellers in series produce noticeably more head than a single-impeller pump of the same power, in a robust cast iron casing. It is rated at 1.1 kW (1.5 HP) on 1 x 220-240 V ~ 50 Hz, delivering a maximum flow of 7.2 m³/h and a maximum head of 38.5 m.
At a glance
Power: 1 x 220-240 V ~ 50 HzSupply: 1 x 220-240 V ~ 50 HzMax. head: 38.5 mMax. flow: 9.6 m³/h (160 l/min)Connections: 1½" GBest for: Pressurisation units in water systems, Filling of pressure vessels and tanks, Sprinkler and irrigation systemsSpecifications
| Brand | DAB |
| Model | DAB K 35/100 M |
| Pump type | Twin-Impeller Centrifugal Pump |
| Power supply | 1 x 220-240 V ~ 50 Hz |
| Absorbed power P1 max | 1.56 kW |
| Nominal power P2 | 1.1 kW (1.5 HP) |
| Rated current | 7.1 A |
| Capacitor | 25 µF / 450 V |
| Speed | 2780 rpm |
| Starting current | 33 A |
| Maximum head | 38.5 m |
| Maximum flow | 7.2 m³/h |
| Suction port (DNA) | 1½" G |
| Discharge port (DNM) | 1" G |
| Liquid temperature range | -10 °C to +50 °C |
| Maximum ambient temperature | +40 °C |
| Maximum operating pressure | 6 bar (600 kPa) |
| Protection class | IP 44 |
| Terminal board protection class | IP 55 |
| Insulation class | F |
| Installation | Fixed, horizontal or vertical (motor above pump) |
| Pump gross weight | 22.0 kg |
| Dimensions (W × L × H) | 23.4 × 41.5 × 29.5 cm |
| Item code | K35-100M(220V) |
Performance Table
| Flow Q (m³/h) | 0 | 2.4 | 3.6 | 4.8 | 6 | 7.2 | 9 | 9.6 |
|---|---|---|---|---|---|---|---|---|
| Flow Q (l/min) | 0 | 40 | 60 | 80 | 100 | 120 | 150 | 160 |
| Head H (m) | 38.5 | 37.5 | 36.5 | 35 | 32 | 28.5 | 18.5 | 17.5 |
Head at each flow rate from the manufacturer's technical data. For a duty-point check use the Get a Quote wizard below.
Performance Curves and Technical Data (PDF)
Download the curve sheet with the performance curves, dimensions and technical data for the DAB K 35/100 M:
DAB K 35/100 M Twin-Impeller Centrifugal Pump – Performance Curve and Technical Data
8 kB | Download
Applications
- Pressurisation units in water systems
- Filling of pressure vessels and tanks
- Sprinkler and irrigation systems
- General water supply in domestic, civil and industrial environments
- Booster duty where steady pressure at moderate flow is required
Pump Construction
- Twin-impeller design for higher head than a comparable single-impeller pump
- Pump body and motor support in cast iron for durability and quiet running
- Technopolymer impellers
- Carbon / ceramic mechanical seal
- Install horizontal or vertical, provided the motor is always above the pump
Motor Construction
- Closed asynchronous type with external ventilation cooling
- Rotor on permanently lubricated, oversized ball bearings for low noise and durability
- Standard built-in thermo-amperometric protection
- Capacitor permanently fitted on single phase versions
- Construction according to CEI 2-3
Materials in Contact with the Liquid
| Component | Material |
|---|---|
| Pump body | Cast iron 200 UNI ISO 185 |
| Motor support | Cast iron 200 UNI ISO 185 |
| Impeller | Technopolymer A |
| Shaft with rotor | AISI 303 stainless steel (X10 CrNiS 1089) |
| Mechanical seal | Carbon / ceramic |
| Gasket | NBR rubber |
Need help choosing or want a price?
Our pump team will check the right size for your flow and head and give you a quote.
WhatsApp us: 082 516 2248 Get a Quote / Size my pump info@pumps.co.za
Frequently Asked Questions
What is the maximum head of the DAB K 35/100 M?
The DAB K 35/100 M has a maximum head of 38.5 m.
How much water can the DAB K 35/100 M pump?
The DAB K 35/100 M pumps up to 9.6 m³/h (160 l/min).
What power supply does the DAB K 35/100 M need?
Supply: 1 x 220-240 V ~ 50 Hz. Motor power: 1 x 220-240 V ~ 50 Hz.
What are the pipe connections of the DAB K 35/100 M?
1½" G.
